Pipe Fittings
To support the range of radiator thermostats, Danfoss Randall offers a wide range of compression fittings for valves. |
Water Based
|
Underfloor Heating Controls
From the start of the concept Danfoss has been continually developing control components for underfloor heating, and they are now the control manufacturer with both the greatest product portfolio for UFH controls and the one with the widest experience in the field. |
For Further Details Of All Products
Underfloor Heating Systems
Under Floor Central Heating
Underfloor heating from the whole floor area of the house gently warms the air above, eliminating cold spots. The warm air convects from the floor surface losing approximately 2 degrees centigrade at 2.0 meters above the floor, which makes the system ideal for all ceiling heights.
Underfloor heating has made it possible to reduce energy consumption by using low water temperatures. These systems, based on the development of complex and very high quality plastic pipe, such as the multilayer pipe, now account for over 60% of some European heating markets.
Underfloor Heating
Underfloor heating is far from a new concept, it was first used by the Romans whose dwellings were constructed with voids through which air, warmed by an open fire, would pass, thus heating the structure. Underfloor heating is not a new concept in the UK either. In the past electric heating elements were buried within floor screeds. These were heated over night using 'cheap rate' electricity. However, this method was expensive to run and uncontrollable and the building would over heat during the day but in the evening, when heat is generally required, no further heat was available.
Utilising today's modern multilayer pipes, control systems and high efficiency boilers, the underfloor heating systems of today are extremely comfortable and controllable. Radiators are no longer needed so giving more room space. The heat is more evenly distributed and dust is not circulated.
Underfloor heating from the whole floor area of the house gently warms the air above, eliminating cold spots. The warm air convects from the floor surface losing approximately 2 degrees centigrade at 2.0 meters above the floor, which makes the system ideal for all ceiling heights.
Independent tests reveal that the most acceptable indoor climate is one in which the floor temperature ranges between 19-29°C and the air temperature at head level ranges between 20 and 24°C. With radiator or convector heating systems a vertical temperature gradient is produced; colder at foot level than at the head.
Underfloor heating has made it possible to reduce energy consumption by using low water temperatures. These systems, based on the development of complex and very high quality plastic pipe, such as the multilayer pipe, now account for over 60% of some European heating markets.
